Product Description
Dulux Trade Diamond Satinwood is a tough & durable satin finish that provides excellent protection from scratches, stains and grease.
The water-based formulation is designed to be used in high traffic areas, such as corridors, stairways and access areas, while having the added benefit of being quick drying with low odour. With professional aesthetics finish and non-yellowing water-based technology, it has never been so easy to switch to water based paints.
Application Description
Application : Apply by brush or roller. For best results use good quality synthetic (nylon polyester) brush or short pile synthetic/mohair roller designed for the application of water-based paints.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood. Where a strong colour change is involved then a coat of Dulux Trade Quick Dry Undercoat may be required.
Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
Most suitable for HVLP spray application using a minimum 3 stage unit. A typical setting is a 1.8mm spray tip (equivalent #4 fluid set) and a maximum of 20% thinning.
All recommendations are approximate as all settings will be affected by equipment
Size: 1 Litre
