Toupret All-in-one airless spray plaster for interior levelling and fine finishing of walls and ceilings
- One coat system
- High build
- Extra fine finish
- Smooth glide
Application method:
Spray machine
Time between coats:
Second coat as soon as the filler is hard and dry to the touch.
Surfaces:
Airless All-In-One Plaster can be applied to new or renovated substrates, painted or unpainted: Gypsum, plasterboard/drywall, old painted substrates, cement, concrete, cellular concrete. There is no need to prime or seal the surface before application.
Overcoat with:
Airless All-In-One Plaster can be coated with all types of fillers, paint or wall coverings.
Maximum recommended application thickness:
Up to 5 mm.
Mixing rate:
Ready to Use.
Ready to paint time:
24 to 48 Hours
Working time:
No limit
Application tools:
Airless machine gun
Recommended temperature and humidity for application:
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion:
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness):
1700.00
Colour when dry:
White
Guarantee:
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Clean tools with:
Water.
Pack size:
Bag 25 KG
Do not apply on bonded coatings.
Do not apply over polystyrene.
Do not apply on damp grounds.
Do not apply on exterior surfaces.
Supplied in pallet quantity only - dispatched directly from Toupret in approximately 1 week
